【Summary Description】Before starting the machine, check whether the fastening bolts of the equipment and devices are loose, wipe all the parts on the machine with thinner water, and then readjust the glue. It is forbidden to store any sundries on the workbench.
1 Before starting the machine, check whether the fastening bolts of the equipment are loose, wipe all parts of the machine with thinner water, and then readjust the glue. It is forbidden to store any sundries on the workbench.
2 Close the main power switch, and check whether the start and stop of the host, the start and stop of gluing, the start and stop of winding, the heating of the drying channel, the power supply electrical switch for air extraction and the pointer of the instrument are flexible, reliable, sensitive and correct. After power on, observe whether the equipment operates normally and whether there is abnormal sound and burning smell.
3 After the machine is started, it is necessary to master the speed regulation of the drum, the temperature control of the drum and the temperature control of the drying tunnel. Strictly control the speed and temperature of the equipment.
4 After the equipment is started, it should run for 3~5 minutes without any load, test several films, check that they meet the requirements, and then conduct mass production without film test, and formal production is not allowed.
The electromagnet does not pull in, which is mostly caused by the internal fault of the host, the burnt electromagnet coil, the line interruption and other reasons. The solution is: first, check whether there is a problem inside or outside the host; Secondly, check the fuse tube of the electromagnet to see if there is any sign of electrification of the electromagnet, remove the mechanical jamming, and check the internal power supply when everything is normal; In weighing and packaging machines, the common causes of such failures are sensor damage, bridge supply voltage failure, and incorrect line connection or interruption. The troubleshooting method is to detect the load signal of the sensor and its connection or the host, and detect the bridge supply and amplification circuit or computer output display circuit. Sometimes, the system stability is not good, resulting in unstable bag volume. To solve this problem, you can try to find out whether the line is faulty.MORE +
Packaging machine is a kind of machine for packaging products, which plays a role of protection and beauty. The packaging machine is mainly divided into two aspects: 1. assembly line integrated production packaging, 2. product peripheral packaging equipment.MORE +
The plane type film applicator realizes the labeling and film pasting of the upper plane and upper arc of the workpiece, such as boxes, books, plastic shells, etc. There are two methods of roll pasting and suction pasting, which are mainly selected according to the efficiency, accuracy and bubble requirements. The round bottle type film sticking machine can stick labels or films on the circular surface of cylindrical and conical products, such as glass bottles, plastic bottles, etc. It can realize the functions of circumferential, semicircular, circumferential double-sided, circumferential positioning and labeling. There are mainly two ways of vertical labeling and horizontal labeling.MORE +