BLOG

Sep 22,2022
General troubleshooting of packaging machine
The electromagnet does not pull in, which is mostly caused by the internal fault of the host, the burnt electromagnet coil, the line interruption and other reasons. The solution is: first, check whether there is a problem inside or outside the host; Secondly, check the fuse tube of the electromagnet to see if there is any sign of electrification of the electromagnet, remove the mechanical jamming, and check the internal power supply when everything is normal; In weighing and packaging machines, the common causes of such failures are sensor damage, bridge supply voltage failure, and incorrect line connection or interruption. The troubleshooting method is to detect the load signal of the sensor and its connection or the host, and detect the bridge supply and amplification circuit or computer output display circuit. Sometimes, the system stability is not good, resulting in unstable bag volume. To solve this problem, you can try to find out whether the line is faulty.
Sep 22,2022
Basic knowledge of packaging machine
Packaging machine is a kind of machine for packaging products, which plays a role of protection and beauty. The packaging machine is mainly divided into two aspects: 1. assembly line integrated production packaging, 2. product peripheral packaging equipment.
Sep 22,2022
Operating Instructions for Film Applicator
Before starting the machine, check whether the fastening bolts of the equipment and devices are loose, wipe all the parts on the machine with thinner water, and then readjust the glue. It is forbidden to store any sundries on the workbench.
Sep 22,2022
The plane type film applicator realizes the labeling and film pasting of the upper plane and upper arc of the workpiece, such as boxes, books, plastic shells, etc. There are two methods of roll pasting and suction pasting, which are mainly selected according to the efficiency, accuracy and bubble requirements. The round bottle type film sticking machine can stick labels or films on the circular surface of cylindrical and conical products, such as glass bottles, plastic bottles, etc. It can realize the functions of circumferential, semicircular, circumferential double-sided, circumferential positioning and labeling. There are mainly two ways of vertical labeling and horizontal labeling.
Sep 22,2022
Characteristics of film applicator
Automatic mounting machine for assembling self-adhesive parts, with stable equipment performance; Simple operation and convenient use; It is widely used in electronic/communication/semiconductor industries.
Sep 22,2022
Working principle of film sticking machine
The self-adhesive parts on the belt are pulled to the stripper under the suction device by the drive device, led down by the self-adhesive, stripped by a series of tensioning guides, and then automatically attached to the workpiece positioned by the fixture after being calibrated by the automatic manipulator.
Sep 22,2022
(1) The processing temperature is low, the time is short, and the workpiece deformation is small. (2) It is not limited by the steel type. Carbon steel, low alloy steel, tool and die steel, stainless steel, cast iron and iron base powder unmetallic materials can be subject to soft nitriding treatment. The surface hardness of the workpiece after soft nitriding is related to the nitriding process and materials.
Sep 22,2022
One of the characteristics of modern extruders is to develop towards energy-saving. To reduce the cost of aluminum products, one of the important measures is to save energy. The power of extruders is quite large, so energy saving naturally becomes the first choice of entrepreneurs. Mingsheng Machinery's independent research and development has reduced the power consumption of aluminum in the extrusion process by adopting servo system energy-saving control and optimizing the design of hydraulic circuit.
Sep 22,2022
The extruder is mainly composed of three parts: mechanical part, hydraulic part and electrical part.
Sep 23,2022
SY-SCX-1 high temperature chain belt conveyor production line
Our company Foshan Nanhai Suyue Machinery Manufacturing Co., Ltd. was established in 1998. After eleven years, our company has developed from the original small workshop to a professional manufacturer with more than 300 employees who can provide complete sets of aluminum equipment from extrusion to surface treatment.
Contact Us
Tel :
+86-0757-81184482
Email :
suyuegroup@163.com
Address :
No.19, Buxin Industrial Zone, Lishui Town, Nanhai District, Foshan City,Guanadong Proyince, China