15

2021

-

09

Features of soft nitriding

Classification:


【Summary Description】(1) The processing temperature is low, the time is short, and the workpiece deformation is small. (2) It is not limited by the steel type. Carbon steel, low alloy steel, tool and die steel, stainless steel, cast iron and iron base powder unmetallic materials can be subject to soft nitriding treatment. The surface hardness of the workpiece after soft nitriding is related to the nitriding process and materials.

(1) The processing temperature is low, the time is short, and the workpiece deformation is small.

(2) It is not limited by the steel type. Carbon steel, low alloy steel, tool and die steel, stainless steel, cast iron and iron base powder unmetallic materials can be subject to soft nitriding treatment. The surface hardness of the workpiece after soft nitriding is related to the nitriding process and materials.

(3) It can significantly improve the fatigue strength, wear resistance and corrosion resistance of the workpiece. Under dry friction conditions, it also has the properties of scratch resistance and bite resistance.

(4) . Since the soft nitriding layer is not brittle ξ Therefore, the nitriding layer has certain toughness and is not easy to peel off.

Therefore, soft nitriding in production has been widely used in the treatment of wear-resistant workpieces such as molds, measuring tools, tools (such as high-speed steel tools), crankshafts, gears, cylinder liners, and mechanical structures.


General troubleshooting of packaging machine

The electromagnet does not pull in, which is mostly caused by the internal fault of the host, the burnt electromagnet coil, the line interruption and other reasons. The solution is: first, check whether there is a problem inside or outside the host; Secondly, check the fuse tube of the electromagnet to see if there is any sign of electrification of the electromagnet, remove the mechanical jamming, and check the internal power supply when everything is normal; In weighing and packaging machines, the common causes of such failures are sensor damage, bridge supply voltage failure, and incorrect line connection or interruption. The troubleshooting method is to detect the load signal of the sensor and its connection or the host, and detect the bridge supply and amplification circuit or computer output display circuit. Sometimes, the system stability is not good, resulting in unstable bag volume. To solve this problem, you can try to find out whether the line is faulty.

MORE +

Basic knowledge of packaging machine

Packaging machine is a kind of machine for packaging products, which plays a role of protection and beauty. The packaging machine is mainly divided into two aspects: 1. assembly line integrated production packaging, 2. product peripheral packaging equipment.

MORE +

Operating Instructions for Film Applicator

Before starting the machine, check whether the fastening bolts of the equipment and devices are loose, wipe all the parts on the machine with thinner water, and then readjust the glue. It is forbidden to store any sundries on the workbench.

MORE +

Film applicator concept

The plane type film applicator realizes the labeling and film pasting of the upper plane and upper arc of the workpiece, such as boxes, books, plastic shells, etc. There are two methods of roll pasting and suction pasting, which are mainly selected according to the efficiency, accuracy and bubble requirements. The round bottle type film sticking machine can stick labels or films on the circular surface of cylindrical and conical products, such as glass bottles, plastic bottles, etc. It can realize the functions of circumferential, semicircular, circumferential double-sided, circumferential positioning and labeling. There are mainly two ways of vertical labeling and horizontal labeling.

MORE +
×
  • Tel:+86 0757-81184482
  • Mailbox:fssuyue1998@163.com
ewm

Wechat QR CODE

TEL

Hotline

Address:16 road Shangang Industrial Area Yanfeng Avenue Nanhai District Foshan City
Domestic Sales Department:

  YINGWEI PAN  

Tel: +86 13928656819

  PENGHUI LUO   

Tel: +86 13553318916
Email: fssuyue1998@163.com
International Sales Department:

  May Zhong

What's app/Tel: +86 13927209851

  Nicole Pan

What's app/Tel: +86 13242518548
Email:  suyuegroup@163.com
                     
                     

Copyright © Foshan Ouzhi Machinery Technology Co., Ltd www.300.cn Foshan SEO